What is the X10?
The X10 is a knee rehabilitation machine. It gently and quickly helps knee replacement patients regain their knee’s range of motion and strength. It can be used prior to surgery as a “pre-hab” tool but is most commonly used in the weeks immediately after surgery in the home. Use of the X10 dramatically speeds up recovery from knee replacement by many months with dramatically less pain than with traditional physical therapy. Click here to see images of the X10 Knee Machine.
Is X10 covered by insurance?
In Michigan X10 is available in your home at no additional cost to you by Michigan VNA as well as other home care companies. As long as your insurance covers in-home rehabilitation, X10 can be part of your care for the first 2-3 weeks post-surgery, while you are still home bound.
X10 is also covered by Blue Cross Blue Shield of Michigan for use in your home with or without home therapy. No matter where you are for your recovery, if you have BCBS MI, you are covered.
For most the X10 is a short term rental. X10 patients usually need the X10 for about two weeks for range of motion and possible a third or fourth week to address a strength deficit. We have a partnership with Care Credit to make payments easy – there should be no major financial obstacle to obtaining X10 for recovery.
Other Insurers. Increasingly our patients have found small pockets of coverage, which is very encouraging. We hold the hope out that major insurers will soon follow the lead of Blue Cross Blue Shield of Michigan.
Where is X10 Available?
X10™ is available in Michigan, Ohio, Indiana, West Virginia, Illinois, New York, New Jersey, Pennsylvania, Maryland, Delaware, Washington DC, Connecticut, Virginia, Rhode Island, Massachusetts, Maine, Vermont, Georgia, Alabama, Florida, Texas and Oklahoma.
Delivery, setup for the X10 in my home; and how big is the X10?
The X10 is usually delivered a few days before you go to the hospital for your surgery. We set up the machine in a convenient place (preferably near your TV as you can enjoy entertainment while using the machine). It takes up as much room as does an easy chair (approximately 3.5 feet x 3.5 feet). The X10 plugs directly into your wall power outlet with a normal three-pronged plug. It has no special power requirements. It is easy to get on and off the machine. You will be instructed on how to use the X10, and within a few minutes you can begin your therapy. At the end of your weeks of therapy we will pick up the machine from your home.
Is X10 a CPM machine?
In a word, no. The X10 is the first in a new class of far superior machines when compared to the CPM. These machines are called PMKR machines, PMKR stands for Pressure Modulated Knee Rehabilitation.
CPM (continuous passive motion) machines are based on technology from the 1970’s that simply move a patient’s leg between two set points without helping to expand the range of motion in any meaningful way. More about the CPM machine here.
PMKR machines are far more effective for knee patients. The machines read a patients knee pressure and adjust to the level of tension to minimize discomfort and deliver effective therapy. X10 technology is based upon two unique method patents that allow us to move the knee joint in a fundamentally different way that leads to rapid gains in flexibility and strength without creating pain. This helps the patient work with the therapy and overcomes the chronic therapist issue of Protective Muscle Guarding. X10 incorporates active and passive ROM, along with isotonic and eccentric strengthening.
The X10 is completely unique, patented, and represents a giant leap in knee surgery care. There is no comparable device. Important attributes of the X10 include:
- Passive movement that adjusts to the human body
- Keeping patients out of pain
- Enabling range of motion gains with no new swelling
- Reduction of edema
- Controlled active motion (mobility under your own power)
- Highly efficient strength training:
- Works quadriceps, hamstrings, calf
- Stops muscle atrophy soon after surgery
- Helps regain pre-surgery strength
- Wireless data transmission to a personal X10 Recovery Coach (assigned to each patient)
The X10 is a significant improvement to antiquated technology like the CPM machine, The value of the CPM machine for knee surgery recovery has been debunked over the past 10-15 years, and for most surgeons, hospitals and insurance companies it is no longer in use.
Why is X10 better than other forms of rehab?
X10 is more gentle than traditional physical therapy. You get more therapy in your home than you do with traditional home care. X10’s onboard computer allows you to track your progress real-time, providing you with measurable targets and goals and a daily record of your leg’s flexibility and strength.
The X10’s patented Comfort Threshold™ allows you to start muscle retraining within days of your surgery, weeks faster than with traditional rehabilitation. Rebuilding the strength in your leg will help ensure that you make a full recovery and can get back to all your daily activities – unlimited by knee pain!
Finally, why not recover at home with the best technology? In-Patient nursing care is a necessity for some who are elderly or need special care, but it can be costly and unfamiliar, and most facilities do not have experience with orthopedics. With X10 you get more therapy than any other setting, while recovering in the comfort of your own home.
Is there concrete proof that X10 is better than traditional rehab?
Yes there is. Click here to view a complete comparison of X10 and traditional rehab both with and without the use of CPM machines. Patients recover significantly faster with X10. To view new research about the X10 click here: The Global Journal of Orthopedics Research Study
Can the X10 help me recover after a Manipulation Under Anesthesia?
Yes, yes, yes. The X10 is highly effective after a MUA (Manipulation Under Anesthesia). It is of paramount importance that you begin working on the X10 within 24 hours of your Manipulation. Scar tissue is often the culprit for patients who require a MUA. The X10 can help you beat the race against the formation of scar tissue, but research has shown that it matters how soon after surgery you start on the machine. The sooner the better. Click here for more.
Can I Avoid a Manipulation Under Anesthesia?
There is no better method of avoiding an MUA than the X10 system. If the X10 cannot do it then there is no way to avoid the MUA. To learn from patients who have avoided the MUA with X10 click here. For more on how the X10 avoids the MUA click here.
Do I have to follow my hospital’s home care program?
No. The choice of how to rehabilitate from a knee surgery is up to you. Your surgeon and hospital discharge planner may recommend specific home care solutions that are part of their medical system.
Can I use my own outpatient facility after using the X10 in my home?
The choice of an outpatient therapy provider is up to you. You can choose any physical therapy clinic you like. It is our experience that X10 patients have much less of a need for outpatient care; in some cases they do not need any outpatient care at all.
Do I need a prescription for X10?
Yes (& no). You don’t need a separate prescription for X10 Therapy. Many patients decide to add the X10 to whatever therapy solution they have arranged. If they are not covered, patients can pay for X10 on their own. We offer financing with very reasonable terms through our partner, Care Credit.
If you live in Michigan you can get a prescription (or “orders”) from your surgeon for home care services (and select a home care provide that has X10) or for specifically for the X10 if you have Blue Cross Blue Shield of Michigan. To get started, all you have to do is call (855) 910-5633. We will verify that your insurance will cover home healthcare and start the process of getting orders from your surgeon.
At any time you can call us to sort this out (1-855-910-5633). We will answer all of your questions, and if you want to go ahead with X10 we can get started together.
What is the difference between Inpatient Care, Home Care, Outpatient Care and a Skilled Nursing Facility?
Inpatient Care is provided by a facility that can care for you around the clock. You are transported from the hospital to a skilled nursing facility where you stay and receive 24/7 nursing case and physical therapy.
Home Care is in-home rehabilitation and nursing care provided by therapists and nurses that comes to your home 3-5 times per week while you are home bound.
Outpatient Care is provided in an outpatient physical therapy clinic. You travel on your own to these facilities where you work with a physical therapist on your rehabilitation. This is usually covered by your insurance for a finite number of visits after your knee replacement.
A Skilled Nursing Facility provides a type of residential care. It is a place for people who require continual nursing care and have a significant difficulty coping with the required Activities of Daily Living. Nursing aides and skilled nurses are usually available 24 hours a day
Click on the images below to learn about X10 from individual patients
Is it too late to benefit from the X10?
- With the X10 we have treated patents prior to surgery (pre-hab), right after surgery, six to 12 weeks post surgery, and even five months post-surgery with great success
- In some instances patients have seen important benefits from X10 more than 12 month after their surgery
- Every recovery is different, however X10 is successful in reducing/eliminating swelling, gaining knee range of motion, and recovering lost strength quickly
- The X10 has successfuly helped patients recover from:
What does it cost to use the X10?
- The X10 is fully covered by Blue Cross Blue Shield of Michigan in the state of Michigan (cost = BCBS Copay)
- Select Home-care companies include X10 in their care of knee surgery patients (cost = BCBS Copay)
- X10 is available as a weekly rental with the corresponding costs:
How long will I need the X10?
The X10 gets the job done quickly: it is traditionally a short term rental.
Patient use X10 for 10-21 days to:
- Recover directly after surgery
- Avoid a knee Manipulation Under Anesthesia/Arthroscopy
- Recover after A Knee Manipulation Under Anesthesia/Arthroscopy
Pre-hab programs (pre-surgery range of motion and strength building) run from 10-21 days
Patients who use X10 after a patella fracture may need the machine for a 21-28 days
Is the X10 well known in the U.S?
X10 Therapy was founded in 2008. The X10 Machine is primarily in use in the state of Michigan, our home state. In Michigan it is well-known in the orthopedic surgery community. X10 machines are designed, developed, and manufactured in Michigan.
As we expand geographically we introduce the X10 to surgeons as part of our work with new patients. Patients have introduced X10 to hundreds of surgeons across the nation. New research, published in The Global Journal of Orthopedics Research in December 2018, has greatly expanded our profile internationally. As we expand we expect medical professionals who keep up with the newest published research will be aware of the X10.
If your surgeon does not yet know about X10, we are ready to send a packet of information to your surgeon’s office and schedule a meeting to introduce the X10 in-person.
Total knee Arthroplasty: TKA
TKA stands for Total Knee Arthroplasty. It is a surgery to replace the weight bearing surfaces of the knee joint to eliminate pain and lack of motion in the knee. Arthroplasty means “surgical repair of joint.” It is an orthopedic surgical procedure where the articular surface (location where bones connect) of a join is replaced or realigned or remodeled. It is typically done to restore knee function after damage. Damage can be caused by arthritis or some other type of trauma to the area.
This is a group of mechanical abnormalities involving the degradation of joints including articular cartilage (connective tissue) and subchondral (rounded end) bone. Symptoms can include pain in the joint, stiffness, tenderness and locking of the joint. This can be caused by your heredity, or your body’s deficits (developmental, metabolic, and/or mechanical). When bone surfaces become less well protected by cartilage, the bone may be exposed and damaged. This can result in decreased movement; muscles in the area can atrophy and ligaments can become more lax.
What is Flexion Contracture?
Arthritic and non-arthritic joints may develop “arthrofibrosis.” In this condition the knee fails to straighten fully. This is called a flexion contracture. Persons with this condition walk with the knee bent to varying degrees. The angle that the knee makes can be measured and is labeled as the degrees of the flexion contracture. The higher the number, the more bent the knee is.
Our clinical team is ready to help you at any time with your knee surgery recovery. You can reach us with a phone call at 1-855-910-5633 or an email at email@example.com. To schedule a 15 minute call with us click on the Want to Learn More? image on this page.
Please feel free to reach out to our clinical team at any time to discuss your knee surgery recovery. 1-855-910-5633. firstname.lastname@example.org.